1.75mm PLA filament kala polū
Nā Hiʻohiʻona Huahana
| Brand | TʻOrwell |
| Mea Hana | PLA Maʻamau (NatureWorks 4032D / Total-Corbion LX575) |
| Anawaena | 1.75mm/2.85mm/3.0mm |
| Kaumaha ʻupena | 1 Kg/wili; 250g/wili; 500g/wili; 3kg/wili; 5kg/wili; 10kg/wili |
| Kaumaha holoʻokoʻa | 1.2Kg/wili |
| Hoʻomanawanui | ± 0.02mm |
| Kaiapuni Mālama | Maloʻo a hoʻoulu ʻia ka ea |
| Dhoʻonohonoho ʻana | 55˚C no 6 hola |
| Nā mea kākoʻo | E noi meTʻO Orwell HIPS, Torwell PVA |
| ʻAe ʻia ka palapala hōʻoia | CE, MSDS, Reach, FDA, TUV a me SGS |
| Kūlike me | ʻO Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker a me nā mea paʻi FDM 3D ʻē aʻe. |
| Pūʻolo | 1kg/ʻōwili; 8 mau ʻōwili/ctn a i ʻole 10 mau ʻōwili/ctnʻeke palaki i hoʻopaʻa ʻia me nā desiccants |
Nā Waihoʻoluʻu Hou Aʻe
Waihoʻoluʻu i loaʻa:
| Waihoʻoluʻu kumu | Keʻokeʻo, ʻEleʻele, ʻUlaʻula, Polū, Melemele, ʻŌmaʻomaʻo, ʻAno, |
| Kala ʻē aʻe | Kāleka, Hinahina, ʻIli, Gula, ʻĀkala, Poni, ʻAlani, Melemele-gula, Lāʻau, ʻŌmaʻomaʻo Kalikimaka, Polū Galaxy, Polū Lani, Moakaka |
| Moʻo fluorescent | ʻUlaʻula ʻĀlohilohi, Melemele ʻĀlohilohi, ʻŌmaʻomaʻo ʻĀlohilohi, Polū ʻĀlohilohi |
| Moʻo mālamalama | ʻŌmaʻomaʻo ʻālohilohi, Polū ʻālohilohi |
| Moʻo hoʻololi kala | ʻŌmaʻomaʻo uliuli i ka melemele ʻōmaʻomaʻo, Polū i keʻokeʻo, Poni i ka Pink, Hina i keʻokeʻo |
| E ʻae i ke kala PMS o ka mea kūʻai aku | |
Hōʻike Hoʻohālike
Pūʻolo
1kg ʻōwili 1.75mm PLA filament me ka desiccant i loko o ka pūʻolo vacuum
ʻO kēlā me kēia spool i loko o ka pahu pākahi (pahu Torwell, pahu Neutral, a i ʻole ka pahu Customized i loaʻa)
8 pahu no kēlā me kēia pahu (ka nui o ka pahu 44x44x19cm)
ʻO kā mākou mau pono
a). Mea hana, ma nā huahana filament a me nā huahana kuhikuhi, ke kumu kūʻai hoʻokūkū.
b).10 mau makahiki o ka ʻike e hana pū ana me nā mea like ʻole o OEM.
c). QC: 100% nānā ʻana.
d). Hōʻoia i ka laʻana: ma mua o ka hoʻomaka ʻana o ka hana nui e hoʻouna mākou i nā laʻana hana mua i ka mea kūʻai aku no ka hōʻoia. E hoʻololi mākou i ka ʻōpala a hiki i ka māʻona o ka mea kūʻai aku.
e). ʻAe ʻia ke kauoha liʻiliʻi.
f). QC koʻikoʻi a me ke kūlana kiʻekiʻe.
g). Ke kaʻina hana hana akamai loa.
h). He ʻano ākea o nā huahana OEM.
| Ka nui o ka paʻa | 1.24 g/cm3 |
| Heluhelu Hoʻoheheʻe (g/10min) | 3.5（190℃/2.16kg） |
| Mahana Hoʻololi Wela | 53℃, 0.45MPa |
| Ikaika Hoʻopaʻa | 72 MPa |
| Elongation i ka wā hoʻomaha | 11.8% |
| Ikaika Flexural | 90 MPa |
| Modulus Flexural | 1915 MPa |
| Ikaika hopena IZOD | 5.4kJ/ʻAʻole maopopo |
| Ka paʻa | 4/10 |
| Ka hiki ke paʻi | 9/10 |
| Mahana o ka mea hoʻopuka (℃) | 190 – 220℃Manaʻo ʻia 215℃ |
| Mahana moe (℃) | 25 – 60°C |
| Ka nui o ka nozzle | ≥0.4mm |
| Ka wikiwiki o ka peʻahi | Ma 100% |
| Ka wikiwiki o ka paʻi ʻana | 40 – 100mm/s |
| Moe Hoʻomehana | Koho |
| Nā ʻIli Kūkulu i Manaʻo ʻia | Aniani me ke kāpili, Pepa uhi, Lipine polū, BuilTak, PEI |
