1.75mm/2.85mm Filament 3D PLA kala ʻulaʻula
| Brand | Torwell |
| Mea waiwai | PLA maʻamau (NatureWorks 4032D / Total-Corbion LX575) |
| Anawaena | 1.75mm/2.85mm/3.0mm |
| ʻupena paona | 1 Kg/spool;250g/spool;500g/spool;3kg/spool;5kg/spool;10kg/spool |
| Kaumaha nui | 1.2Kg/spool |
| Hoʻomanawanui | ± 0.02mm |
| Kaiapuni Waiho | Maloo a me ka makani |
| Hoʻonohonoho hoʻomaloʻo | 55˚C no 6h |
| Nā mea kākoʻo | E noi me Torwell HIPS, Torwell PVA |
| Apono Hooiaio | CE, MSDS, Reach, FDA, TUV a me SGS |
| Kūlike me | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker a me nā mea paʻi FDM 3D ʻē aʻe. |
| Pūʻolo | 1kg / pahu;8 spools / ctn a i ʻole 10spools / ctnʻeke plastik i hoʻopaʻa ʻia me nā desiccants |
Nā kala hou aku
Hiki ke kala:
| kala kumu | Keʻokeʻo, ʻeleʻele, ʻulaʻula, uliuli, melemele, ʻōmaʻomaʻo, ʻano, |
| kala ʻē aʻe | Kālā, hina, ʻili, gula, ʻulaʻula, ʻulaʻula, ʻalani, melemele-gula, lāʻau, ʻōmaʻomaʻo Kalikimaka, ʻulaʻula Galaxy, ʻulaʻula lani, alohilohi |
| Moʻo ʻōniʻoniʻo | ʻAla ʻulaʻula, ʻulaʻula melemele, ʻōmaʻomaʻo ʻōmaʻomaʻo, ʻulaʻula ʻulaʻula |
| Moʻo ʻālohilohi | ʻŌmaʻomaʻo ʻōlinolino, ʻulaʻula ʻulaʻula |
| Moʻo hoʻololi kala | ʻO ka ʻōmaʻomaʻo uliuli i ka ʻōmaʻomaʻo melemele, ʻO ka uliuli i ke keʻokeʻo, ʻO ka poni i ka ʻulaʻula, ka hina i ke keʻokeʻo |
| E ʻae i ka mea kūʻai aku PMS kala | |
Hōʻike Hoʻohālike
Pūʻolo
1kg ʻōwiliFilament 3D PLAme ka desiccant i loko o ka pūʻolo vaccum.
ʻO kēlā me kēia spool i loko o ka pahu pākahi (pahu Torwell, Pahu Neutral, a i ʻole pahu hoʻopilikino hiki ke loaʻa).
8 pahu no ka pahu pahu (ka nui pahu 44x44x19cm).
No ke aha e kūʻai ai mai Torwell?
ʻO kā mākou pono:
1. ʻAʻohe ʻōhū, maikaʻi maikaʻi e kākoʻo i ka hopena paʻi kūpono.
2. Kūʻai nui mai ka hale hana, kākoʻo i ka hana OEM
3. ʻOi aku ke koho kala, hiki i ka 30 kala, a loaʻa ke kala maʻamau
4. ʻOi aku ka maikaʻi ma mua o ka lawelawe a ma hope o ka lawelawe
No ka nui o kāu kauoha, hāʻawi mākou i ka lawelawe like
Ke lilo ʻoe i hoa pili, e kākoʻo mākou i kāu hoʻolaha, me nā kiʻi huahana
E nānā hou ʻia nā huahana āpau ma mua o ka hoʻouna ʻana.Aia nā ʻenekinia ʻenehana ma ka pūnaewele e kākoʻo inā pono.
Ke ulu nei mākou me nā mea kūʻai aku a pau.
5. Hoʻouna wikiwiki, hōʻailona a kauoha liʻiliʻi paha i loko o nā lā 1-2, nui a iʻole OEM kauoha 5-7 lā.
6. Aia i kāu hui ka pūnaewele?
A: ʻAe, ʻelua mākou pūnaewele: www.3dtorwell.com a me www.torwell3d.com
Nā Manaʻo Paʻi
1. Ma mua a ma hope paha o ka hoʻohana ʻana, paipai mākou iā ʻoe e hoʻokomo i ka hopena o ka filament i loko o ka lua liʻiliʻi ma ka ʻaoʻao o ka spool e pale aku i ka kuʻi.E ʻoluʻolu e ʻoki me ka ʻoki ʻaoʻao ma mua o ka hānai ʻana i ke filament i loko o ka extrude, ʻoiai inā ʻaʻole i haki ʻia, e hoʻopiʻi ke filament i ka jam a i ʻole ka maikaʻi ʻino.
2. Inā ʻaʻole ʻoe e paʻi ana no nā lā e hiki mai ana, e ʻoluʻolu e hoʻihoʻi i ke filament e pale i ka nozzle paʻi.
3. ʻO ka hoʻomaʻemaʻe ʻana me ka filament hoʻomaʻemaʻe a i ʻole ka hoʻololi ʻana i ka nozzle ma mua o ka paʻi ʻana he ala maikaʻi ia e hōʻemi ai i ka jam.
4. Inā ʻilihune ka hoʻopili ʻana o ka papa mua, hiki iā ʻoe ke hoʻāʻo:
1).E hoʻopololei hou i ke pani paʻi e hoʻemi i ka mamao ma waena o ka nozzle a me ka panel.
2).Hiki i ka hoʻohana ʻana i ka lipine 3M/masking tape/stick stick ke kōkua i ka lāʻau filament i ʻoi aku ka maikaʻi.
3).E hoʻokiʻekiʻe i ka mahana moe e like me ia.
5. Loaʻa i nā mea like ʻole a me nā mea paʻi ʻokoʻa ka hoʻonohonoho kūpono ʻokoʻa.E ʻoluʻolu e nānā i kā mākou pūʻolo.A i ʻole leka uila iā mākou no ke kākoʻo ʻenehana hou aku.
| ʻO ka mānoanoa | 1.24 g/cm3 |
| ʻIkepili Kahe Kahe (g/10min) | 3.5（190℃/2.16kg） |
| Wela Hoʻokaʻawale Temp | 53℃, 0.45MPa |
| Ikaika U'i | 72 MPa |
| Elongation ma ka Haka | 11.8% |
| Ikaika Flexural | 90 MPa |
| Modulus Flexural | 1915 MPa |
| IZOD Ka ikaika o ka hopena | 5.4kJ/㎡ |
| Ka lōʻihi | 4/10 |
| Hiki ke paʻi | 9/10 |
| Ka Mahana Extruder(℃) | 190 – 220℃Manaʻo ʻia 215℃ |
| Mehana moe(℃) | 25 – 60°C |
| Ka nui nozzle | ≥0.4mm |
| Ka Mamakini Pehi | Ma 100% |
| Ka māmā paʻi | 40 – 100mm/s |
| Moena Pumehana | Koho |
| Manaʻo ʻia nā ʻaoʻao kūkulu | Ke aniani me ke kāpili, Pepa masking, Blue Tape, BuilTak, PEI |
