ʻO ke kaula 3D moakaka PETG
Nā Hiʻohiʻona Huahana
| Brand | TʻOrwell |
| Mea Hana | ʻO SkyGreen K2012/PN200 |
| Anawaena | 1.75mm/2.85mm/3.0mm |
| Kaumaha ʻupena | 1 Kg/wili; 250g/wili; 500g/wili; 3kg/wili; 5kg/wili; 10kg/wili |
| Kaumaha holoʻokoʻa | 1.2Kg/wili |
| Hoʻomanawanui | ± 0.02mm |
| Llōʻihi | 1.75mm(1kg) = 325m |
| Kaiapuni Mālama | Maloʻo a hoʻoulu ʻia ka ea |
| Dhoʻonohonoho ʻana | 65˚C no 6 hola |
| Nā mea kākoʻo | E noi meTʻO Orwell HIPS, Torwell PVA |
| CʻAe ʻia ka palapala hōʻoia | CE, MSDS, Hiki, FDA, TUV, SGS |
| Kūlike me | ʻO Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker a me nā mīkini paʻi FDM 3D ʻē aʻe |
| Pūʻolo | 1kg/ʻōwili; 8 mau ʻōwili/ctn a i ʻole 10 mau ʻōwili/ctn ʻeke palaki i hoʻopaʻa ʻia me nā desiccants |
Nā Waihoʻoluʻu Hou Aʻe
Waihoʻoluʻu i loaʻa:
| Waihoʻoluʻu kumu | Keʻokeʻo, ʻEleʻele, ʻUlaʻula, Polū, Melemele, ʻŌmaʻomaʻo, Hinahina, Kāleka, ʻAlani, Moakaka |
| Kala ʻē aʻe | Loaʻa ke kala i hoʻopilikino ʻia |
Hōʻike Hoʻohālike
Pūʻolo
1kg ʻōwili PETG filament me ka desiccant i loko o ka pūʻolo vacuum.
Loaʻa kēlā me kēia spool i loko o ka pahu pākahi (pahu Torwell, pahu Neutral, a i ʻole ka pahu Customized).
8 pahu no kēlā me kēia pahu (ka nui o ka pahu he 44x44x19cm).
Hale Hana Hale
Nā nīnau i nīnau pinepine ʻia
1. Aia i hea nā mākeke nui no ke kūʻai aku?
ʻAmelika ʻĀkau, ʻAmelika Hema, ʻEulopa, ʻApelika, ʻĀsia, a pēlā aku.
2. Pehea ka lōʻihi o ka manawa alakaʻi?
ʻO ka maʻamau he 3-5 mau lā no ka laʻana a i ʻole ke kauoha liʻiliʻi. 7-15 mau lā ma hope o ka loaʻa ʻana o ka waihona no ke kauoha nui. E hōʻoia i ka manawa alakaʻi kikoʻī ke kau ʻoe i ke kauoha.
3. He aha ke kūlana o ka pūʻolo?
Hoʻopili ʻoihana hoʻokuʻu aku:
1) Pahu kala Torwell.
2) Hoʻopili kūlike ʻole me ka ʻike ʻole o ka ʻoihana.
3) ʻO kāu pahu hōʻailona ponoʻī e like me kāu noi.
4. He aha ke kaʻina hana hoʻouna?
No nā ukana LCL, hoʻonohonoho mākou i kahi ʻoihana logistics hilinaʻi e hoʻokele iā lākou i ka hale kūʻai o ka mea hoʻouna.
Ⅱ. No nā ukana FLC, hele pololei ka ipu i ka Hale Hana Hoʻouka. ʻO kā mākou poʻe limahana hoʻouka ʻoihana, me kā mākou poʻe limahana forklift e hoʻonohonoho i ka hoʻouka ʻana ma ke ʻano maikaʻi ʻoiai inā ua kaumaha ka hiki ke hoʻouka i kēlā me kēia lā.
I. ʻO kā mākou hoʻokele ʻikepili ʻoihana he hōʻoia ia o ka hoʻopou hou ʻana i ka manawa maoli a me ka hoʻohui ʻana i nā papa inoa hoʻopili uila āpau, invoice.
5. Pehea e hiki ai iaʻu ke loaʻa kekahi mau laʻana?
Hiki iā mākou ke hāʻawi i nā laʻana manuahi no ka hoʻāʻo ʻana, pono wale ka mea kūʻai aku e uku i ke kumukūʻai hoʻouna.
| Ka nui o ka paʻa | 1.27 g/cm3 |
| Helu Kuhikuhi Hoʻoheheʻe (g/10min) | 20（250℃/2.16kg） |
| Mahana Hoʻololi Wela | 65℃, 0.45MPa |
| Ikaika Hoʻopaʻa | 53 MPa |
| Elongation i ka wā hoʻomaha | 83% |
| Ikaika Flexural | 59.3MPa |
| Modulus Flexural | 1075 MPa |
| Ikaika hopena IZOD | 4.7kJ/㎡ |
| Ka paʻa | 8/10 |
| Ka hiki ke paʻi | 9/10 |
| Mahana Extruder (℃) | 230 – 250 ℃Manaʻo ʻia he 240 ℃ |
| Mahana moe (℃) | 70 – 80°C |
| Ka nui o ka nozzle | ≥0.4mm |
| Ka wikiwiki o ka peʻahi | HAʻAHAʻA no ka maikaʻi o ka ʻili / OFF no ka ikaika maikaʻi |
| Ka wikiwiki o ka paʻi ʻana | 40 – 100mm/s |
| Moe Hoʻomehana | Pono |
| Nā ʻIli Kūkulu i Manaʻo ʻia | Aniani me ke kāpili, Pepa uhi, Lipine polū, BuilTak, PEI |
