ʻO ka mīkini paʻi 3D filament PLA Silky Rainbow
Nā kikoʻī
• ʻO ka ʻili nani a ʻālohilohi.
• ʻIli ʻālohilohi a me ke ʻano laumania e like me ke silika.
• 100% bio-degradable a ua ʻāpono ʻia e ka FDA ka palekana meaʻai.
• Haʻahaʻa ka emi ʻana o nā mea, like ke anawaena.
• I ʻōwili pono ʻia, hoʻoheheʻe maikaʻi ʻia, hānai like a mau me ka ʻole o ka pani ʻana i ka nozzle a i ʻole ka extruder.
Nā Hiʻohiʻona Huahana
| Lama | ʻO Torwell |
| Mea Hana | nā hui polymer Pearlescent PLA (NatureWorks 4032D) |
| Anawaena | 1.75mm/2.85mm/3.0mm |
| Kaumaha ʻupena | 1 Kg/wili; 250g/wili; 500g/wili; 3kg/wili; 5kg/wili; 10kg/wili |
| Kaumaha holoʻokoʻa | 1.2Kg/wili |
| Hoʻomanawanui | ± 0.03mm |
| Ka lōʻihi | 1.75mm(1kg) = 325m |
| Kaiapuni Mālama | Maloʻo a hoʻoulu ʻia ka ea |
| Hoʻonohonoho Hoʻomaloʻo | 55˚C no 6 hola |
| Nā mea kākoʻo | E hoʻopili me Torwell HIPS, Torwell PVA |
| ʻAe ʻia ka palapala hōʻoia | CE, MSDS, Reach, FDA, TUV a me SGS |
| Kūlike me | ʻO Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker a me nā mea paʻi FDM 3D ʻē aʻe. |
| Pūʻolo | 1kg/ʻōwili; 8 mau ʻōwili/ctn a i ʻole 10 mau ʻōwili/ctnʻeke palaki i hoʻopaʻa ʻia me nā desiccants |
Hōʻike Hoʻohālike
Hale Hana Hale
Nā Manaʻo Paʻi
1).E hōʻoia e hoʻopaʻa i ka welau o ke filament ma hope o kēlā me kēia hoʻohana ʻana, e like me ke hoʻokomo ʻana i ka welau manuahi o ke filament i loko o ka lua i ʻole e hihia ka filament no ka hoʻohana hou ʻana.
2).I mea e hoʻolōʻihi ai i ke ola o kāu filament, e ʻoluʻolu e mālama iā ia i loko o kahi ʻeke maloʻo a sila ʻia paha
| Ka nui o ka paʻa | 1.21 g/cm3 |
| Heluhelu Hoʻoheheʻe (g/10min) | 4.7（190℃/2.16kg） |
| Mahana Hoʻololi Wela | 52℃, 0.45MPa |
| Ikaika Hoʻopaʻa | 72 MPa |
| Elongation i ka wā hoʻomaha | 14.5% |
| Ikaika Flexural | 65 MPa |
| Modulus Flexural | 1520 MPa |
| Ikaika hopena IZOD | 5.8kJ/㎡ |
| Ka paʻa | 4/10 |
| Ka hiki ke paʻi | 9/10 |
| Mahana Extruder (℃) | 190 – 230 ℃Manaʻo ʻia he 215 ℃ |
| Mahana moe (℃) | 45 – 65°C |
| Ka nui o ka nozzle | ≥0.4mm |
| Ka wikiwiki o ka peʻahi | Ma 100% |
| Ka wikiwiki o ka paʻi ʻana | 40 – 100mm/s |
| Moe Hoʻomehana | Koho |
| Nā ʻIli Kūkulu i Manaʻo ʻia | Aniani me ke kāpili, Pepa uhi, Lipine polū, BuilTak, PEI |
E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou
