ʻUlaʻula 3D filament PETG no ka paʻi 3D
Nā Hiʻohiʻona Huahana
- Ka moakāka a me ke kūpaʻa:He ʻōlinolino maikaʻi ka ʻili o ka huahana i hoʻopau ʻia, he palupalu a translucent nā laina, ʻaʻole maʻalahi ke omo i ka makū, maikaʻi ke kūpaʻa, a paʻakikī ke hana i nā māwae.
- Ke kūpaʻa hopena ikaika:Hoʻohui ʻo PETG i ka hiki ke paʻi ʻia o PLA me ka ikaika o ABS! māmā, kūpaʻa i ka wela, palupalu, a kūpaʻa i ka hopena.
- ʻAʻohe ʻala a hiki ke palaho:Nā mea maka o ka meaʻai, ʻaʻohe mea ʻawahia, ʻaʻohe ala, a hiki ke palaho.
- ʻAʻohe ʻoki lihi, kahe a me ka hoʻokuʻu laumania:Paʻi pololei loa, translucency kiʻekiʻe, ʻaʻohe warping lihi, ʻaʻohe clogs, ʻaʻohe pehu.
| Lama | ʻO Torwell |
| Mea Hana | ʻO SkyGreen K2012/PN200 |
| Anawaena | 1.75mm/2.85mm/3.0mm |
| Kaumaha ʻupena | 1 Kg/wili; 250g/wili; 500g/wili; 3kg/wili; 5kg/wili; 10kg/wili |
| Kaumaha holoʻokoʻa | 1.2Kg/wili |
| Hoʻomanawanui | ± 0.02mm |
| Ka lōʻihi | 1.75mm(1kg) = 325m |
| Kaiapuni Mālama | Maloʻo a hoʻoulu ʻia ka ea |
| Hoʻonohonoho Hoʻomaloʻo | 65˚C no 6 hola |
| Nā mea kākoʻo | E hoʻopili me Torwell HIPS, Torwell PVA |
| ʻAe ʻia ka palapala hōʻoia | CE, MSDS, Hiki, FDA, TUV, SGS |
| Kūlike me | ʻO Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker a me nā mea paʻi FDM 3D ʻē aʻe. |
| Pūʻolo | 1kg/ʻōwili; 8 mau ʻōwili/ctn a i ʻole 10 mau ʻōwili/ctn ʻeke palaki i hoʻopaʻa ʻia me nā desiccants |
Nā Waihoʻoluʻu Hou Aʻe
Loaʻa ke kala
| Waihoʻoluʻu kumu | Keʻokeʻo, ʻEleʻele, ʻUlaʻula, Polū, Melemele, ʻŌmaʻomaʻo, Hinahina, Kāleka, ʻAlani, Moakaka |
| Kala ʻē aʻe | Loaʻa ke kala i hoʻopilikino ʻia |
Hōʻike Hoʻohālike
Pūʻolo
1kg ʻōwili PETG filament me ka desiccant i loko o ka pūʻolo vacuum.
Loaʻa kēlā me kēia spool i loko o ka pahu pākahi (pahu Torwell, pahu Neutral, a i ʻole ka pahu Customized).
8 pahu no kēlā me kēia pahu (ka nui o ka pahu he 44x44x19cm).
Hale Hana Hale
No ke aha e koho ai i ka PETG Filament no ka paʻi 3D?
He maikaʻi loa ka maʻalahi o PETG, ka lōʻihi, a me ke kūpaʻa kemika. ʻO kēia ka mea e lilo ai i koho kūpono no nā mea makemake i ka paʻi 3D e makemake paha e hoʻāʻo ma mua o ka hana hoʻohālike. ʻO ka hoʻohana ʻana i ka filament PETG i ka paʻi 3D ua like ia me kaPLA(ʻAkika Polylactic); ʻoi aku hoʻi inā makemake nui ʻoe i ka hana ʻana i nā hiʻohiʻona no ka hōʻikeʻike a pēlā aku. Eia nō naʻe, ma muli o nā waiwai o PETG, kūpono ia no ka hana ʻana i nā ʻāpana hiki ke hoʻohana ʻia no nā mīkini, nā mea lapaʻau, nā ipu meaʻai a me nā ipu inu.
Ua haʻaheo ʻo Torwell i ko lākou ʻike ʻia ʻana ma ke kaiāulu paʻi 3D no ka hana ʻana i ka filament 3D kiʻekiʻe loa ma ka mākeke, me ke koho nui loa o nā filament a me nā kala ma ke kumu kūʻai kūpono. Mai ke kiʻi a me ka hoʻolālā, a hiki i nā prototypes a me nā kumu hoʻohālike, ua hilinaʻi ʻia ʻo Torwell e hāʻawi i ka ʻenehana paʻi 3D maikaʻi loa.
| Ka nui o ka paʻa | 1.27 g/cm3 |
| Heluhelu Hoʻoheheʻe (g/10min) | 20（250℃/2.16kg） |
| Mahana Hoʻololi Wela | 65℃, 0.45MPa |
| Ikaika Hoʻopaʻa | 53 MPa |
| Elongation i ka wā hoʻomaha | 83% |
| Ikaika Flexural | 59.3MPa |
| Modulus Flexural | 1075 MPa |
| Ikaika hopena IZOD | 4.7kJ/㎡ |
| Ka paʻa | 8/10 |
| Ka hiki ke paʻi | 9/10 |
| Mahana Extruder (℃) | 230 – 250 ℃ Manaʻo ʻia he 240 ℃ |
| Mahana moe (℃) | 70 – 80°C |
| Ka nui o ka nozzle | ≥0.4mm |
| Ka wikiwiki o ka peʻahi | HAʻAHAʻA no ka maikaʻi o ka ʻili / OFF no ka ikaika maikaʻi |
| Ka wikiwiki o ka paʻi ʻana | 40 – 100mm/s |
| Moe Hoʻomehana | Pono |
| Nā ʻIli Kūkulu i Manaʻo ʻia | Aniani me ke kāpili, Pepa uhi, Lipine polū, BuilTak, PEI |
