PLA filament momi keokeo alohilohi
Nā hiʻohiʻona huahana
| Brand | Torwell |
| Mea waiwai | polimer composites Pearlescent PLA (NatureWorks 4032D) |
| Anawaena | 1.75mm/2.85mm/3.0mm |
| ʻupena paona | 1 Kg/spool;250g/spool;500g/spool;3kg/spool;5kg/spool;10kg/spool |
| Kaumaha nui | 1.2Kg/spool |
| Hoʻomanawanui | ± 0.03mm |
| Ka lōʻihi | 1.75mm(1kg) = 325m |
| Kaiapuni Waiho | Maloo a me ka makani |
| Hoʻonohonoho hoʻomaloʻo | 55˚C no 6h |
| Nā mea kākoʻo | E noi me Torwell HIPS, Torwell PVA |
| Apono Hooiaio | CE, MSDS, Reach, FDA, TUV a me SGS |
| Kūlike me | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker a me nā mea paʻi FDM 3D ʻē aʻe. |
| Pūʻolo | 1kg / pahu;8 spools / ctn a i ʻole 10spools / ctn ʻeke plastik i hoʻopaʻa ʻia me nā desiccants |
Nā kala hou aku
Hiki ke kala:
| kala kumu | Keʻokeʻo, ʻeleʻele, ʻulaʻula, uliuli, melemele, ʻōmaʻomaʻo, kala, hina, gula, ʻalani, ʻulaʻula |
| E ʻae i ka mea kūʻai aku PMS kala | |
Hōʻike Hoʻohālike
Pūʻolo
1kg ʻōwili siliki PLA Filament me ka desiccant i loko o ka pūʻolo momi.
ʻO kēlā me kēia spool i loko o ka pahu pākahi (pahu Torwell, Pahu Neutral, a i ʻole pahu hoʻopilikino hiki ke loaʻa).
8 pahu no ka pahu pahu (ka nui pahu 44x44x19cm).
FAQ
A: He mea hana mākou no ka filament 3D ma mua o 10 mau makahiki ma Kina.
A: Hiki iā mākou ke hāʻawi i kahi laʻana manuahi no ka hoʻāʻo, pono ka mea kūʻai akue uku i ke kumu kuai.
A:ʻAe, hiki ke hoʻololi i nā huahana e like me kāu mau koi.E ʻokoʻa ka MOQ ma muli o nā huahana i loaʻa a i ʻole.
ʻOihana hoʻopuka paʻi:
1) Pahu kala Torwell
2) Hoʻopili kūʻokoʻa me ka ʻole o ka ʻike ʻoihana
3) ʻO kāu pahu hōʻailona pono'ī e like me kāu noi.
Please contact us by email (info@torwell.com) or by chat. We will respond to your inquiry within 12hola.
ʻIke hou aku
E like me ka filament PLA maʻamau, TorwellSilk PLA filamentmaʻalahi ke paʻi.Eia nō naʻe, ʻo ka mea kūikawā e pili ana i kēia ʻano filament ʻo ia ka hoʻopuka ʻana i ka ʻili ʻālohilohi a silika, no laila kona inoa.Aloha nui ʻia ka filament silika ma ke kaiāulu paʻi 3D no kāna mau hopena ʻike ma nā paʻi a ʻo ia kekahi o nā koho filament popluar ma ka mākeke.
ʻO ka PLA Silk kahi ʻano filament i loaʻa mai i ka PLA maʻamau, akā me kekahi mau kemika a me nā mea (nā mea hoʻohui) i hui ʻia i loko o ka hui filament.Hoʻonui kēia mau mea hoʻohui i ka filament i ʻoi aku ka nani o nā kiʻi i hana ʻia me ka filament.
Ma waho aʻe o nā hiʻohiʻona hiʻohiʻona like ʻole, ʻano like ka PLA silika me ka PLA maʻamau.ʻOiaʻiʻo, ʻaʻole kēia he mea kupanaha no ka mea, hana mua ʻia ʻo PLA silika me ka plastic PLA maʻamau.No laila, ʻaʻole ikaika loa ka PLA silika.
E ʻoluʻolu e kelepona mai iā mākou ma ka leka uila (info@torwell.com) a i ʻole ma ke kamaʻilio ʻana.E pane mākou i kāu nīnau i loko o 12 mau hola.
| ʻO ka mānoanoa | 1.21 g/cm3 |
| ʻIkepili Kahe Kahe (g/10min) | 4.7（190℃/2.16kg） |
| Wela Hoʻokaʻawale Temp | 52℃, 0.45MPa |
| Ikaika U'i | 72 MPa |
| Elongation ma ka Haka | 14.5% |
| Ikaika Flexural | 65 MPa |
| Modulus Flexural | 1520MPa |
| IZOD Ka ikaika o ka hopena | 5.8kJ/㎡ |
| Ka lōʻihi | 4/10 |
| Hiki ke paʻi | 9/10 |
| Ka Mahana Extruder (℃) | 190 – 230 ℃ Manaʻo ʻia 215 ℃ |
| Mehana moe(℃) | 45 – 65°C |
| Ka nui nozzle | ≥0.4mm |
| Ka Mamakini Pehi | Ma 100% |
| Ka māmā paʻi | 40 – 100mm/s |
| Moena Pumehana | Koho |
| Manaʻo ʻia nā ʻaoʻao kūkulu | Ke aniani me ke kāpili, Pepa masking, Blue Tape, BuilTak, PEI |
