TPU filament 1.75mm moakāka TPU moakaka
Nā Hiʻohiʻona Huahana
| Lama | ʻO Torwell |
| Mea Hana | ʻO ka Polyurethane Thermoplastic papa kiʻekiʻe |
| Anawaena | 1.75mm/2.85mm/3.0mm |
| Kaumaha ʻupena | 1 Kg/wili; 250g/wili; 500g/wili; 3kg/wili; 5kg/wili; 10kg/wili |
| Kaumaha holoʻokoʻa | 1.2Kg/wili |
| Hoʻomanawanui | ± 0.05mm |
| Ka lōʻihi | 1.75mm(1kg) = 330m |
| Kaiapuni Mālama | Maloʻo a hoʻoulu ʻia ka ea |
| Hoʻonohonoho Hoʻomaloʻo | 65˚C no 8 hola |
| Nā mea kākoʻo | E hoʻopili me Torwell HIPS, Torwell PVA |
| ʻAe ʻia ka palapala hōʻoia | CE, MSDS, Reach, FDA, TUV a me SGS |
| Kūlike me | ʻO Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker a me nā mea paʻi FDM 3D ʻē aʻe. |
| Pūʻolo | 1kg/ʻōwili; 8 mau ʻōwili/ctn a i ʻole 10 mau ʻōwili/ctnʻeke palaki i hoʻopaʻa ʻia me nā desiccants |
Nā Waihoʻoluʻu Hou Aʻe
Waihoʻoluʻu i loaʻa:
| Waihoʻoluʻu kumu | Keʻokeʻo, ʻEleʻele, ʻUlaʻula, Polū, Melemele, ʻŌmaʻomaʻo, Hina, ʻAlani, Moakaka |
| E ʻae i ke kala PMS o ka mea kūʻai aku | |
Hōʻike Hoʻohālike
Pūʻolo
1kg ʻōwili 3D filament TPU me ka desiccant i loko o ka pūʻolo vacuum.
Loaʻa kēlā me kēia spool i loko o ka pahu pākahi (pahu Torwell, pahu Neutral, a i ʻole ka pahu Customized).
8 pahu no kēlā me kēia pahu (ka nui o ka pahu he 44x44x19cm).
Hale Hana Hale
ʻIke Hou Aku
ʻO TPU (thermoplastic polyurethane) ka mea nui e hoʻolilo ai i kēia filament i mea kūikawā. He mea paʻa a maʻalahi hoʻi ia i makemake nui ʻia e nā mea makemake i ka paʻi 3D. ʻAʻole e like me nā filament ʻē aʻe, ʻaʻohe ʻala o TPU i ka wā e paʻi ana, e lilo ia i koho maikaʻi loa no ka poʻe e makemake e pale i nā ʻala ʻino i ka wā e paʻi ana.
Hana ʻia mai ka hui ʻana o ka laholio a me ka palakiko, he mea paʻa loa ka mea. ʻO ka ʻoiaʻiʻo, he 95A ka paʻakikī o TPU, ʻo ia hoʻi he kūpaʻa loa ia i ka ʻaʻahu a me ka haehae. ʻO kēia ka mea e lilo ai i koho maikaʻi loa no ka paʻi ʻana i nā ʻāpana nui e like me nā mea pāʻani, nā hihia kelepona, a me nā mea hale.
ʻO kekahi o nā hiʻohiʻona kupaianaha o kēia filament ʻo ia kona hiki ke hoʻolōʻihi ʻia i ʻekolu manawa o kona lōʻihi mua. Mahalo kēia i kona elasticity maikaʻi loa a me ka maʻalahi, ka mea e kūpono ai no ka hana ʻana i nā ʻāpana e pono ai kekahi ʻano o ka maʻalahi, e like me nā mea uila hiki ke hoʻohana ʻia, nā prosthetics, a me nā kapuaʻi kāmaʻa.
Ma waho aʻe o nā waiwai kino kupaianaha, hāʻawi pū kā mākou TPU filament 1.75mm Clear Transparent TPU i ke kūpaʻa wela maikaʻi loa. Hiki iā ia ke kū maʻalahi i nā mahana mai -20°C a i 70°C, e kūpono ai no ka paʻi ʻana i nā ʻāpana e hōʻike ʻia i nā ʻano mahana like ʻole.
ʻO ka mea hope loa, he maʻalahi loa hoʻi kēia filament e paʻi. He mau waiwai hoʻopili maikaʻi loa kona, ʻo ia hoʻi, pili pono ia i ka moena paʻi a ʻaʻole hiki ke wili a ʻōwili paha i ka wā e paʻi ana. Eia kekahi, he kiʻekiʻe kona hiki ke paʻi ʻia, ʻo ia hoʻi, hiki ke paʻi ʻia ma nā mahana haʻahaʻa me nā hopena maikaʻi loa.
I ka hōʻuluʻulu manaʻo, ʻo kā mākou TPU Filament 1.75mm Clear TPU kahi koho maikaʻi loa inā ʻoe e ʻimi nei i kahi filament kiʻekiʻe, paʻa, maʻalahi e hoʻohana a maʻalahi hoʻi. Me kāna mau hiʻohiʻona kupaianaha a me nā ʻano, hiki iā ʻoe ke hana maʻalahi i nā paʻi kiʻekiʻe e mau ana.
| Ka nui o ka paʻa | 1.21 g/cm3 |
| Heluhelu Hoʻoheheʻe (g/10min) | 1.5（190℃/2.16kg） |
| Paʻakikī Kahakai | 95A |
| Ikaika Hoʻopaʻa | 32 MPa |
| Elongation i ka wā hoʻomaha | 800% |
| Ikaika Flexural | / |
| Modulus Flexural | / |
| Ikaika hopena IZOD | / |
| Ka paʻa | 9/10 |
| Ka hiki ke paʻi | 6/10 |
| Mahana Extruder (℃) | 210 – 240 ℃ Manaʻo ʻia he 235 ℃ |
| Mahana moe (℃) | 25 – 60°C |
| Ka nui o ka nozzle | ≥0.4mm |
| Ka wikiwiki o ka peʻahi | Ma 100% |
| Ka wikiwiki o ka paʻi ʻana | 20 – 40mm/s |
| Moe Hoʻomehana | Koho |
| Nā ʻIli Kūkulu i Manaʻo ʻia | Aniani me ke kāpili, Pepa uhi, Lipine polū, BuilTak, PEI |
