PETG Carbon Fiber 3D Printer Filament, 1.75mm 800g/spool
Nā hiʻohiʻona huahana
| Brand | Torwell |
| Mea waiwai | 20% High-Modulus Carbon Fibers i hui pū ʻia me80%PETG |
| Anawaena | 1.75mm/2.85mm/3.0mm |
| ʻupena paona | 800g/spool;250g/spool;500g/spool;1kg / pahu; |
| Kaumaha nui | 1.0Kg/spool |
| Hoʻomanawanui | ± 0.03mm |
| Length | 1.75mm(800g) =260m |
| Kaiapuni Waiho | Maloo a me ka makani |
| Hoʻonohonoho hoʻomaloʻo | 60˚C no 6h |
| Nā mea kākoʻo | E noi meTorwell HIPS, Torwell PVA |
| Apono Hooiaio | CE, MSDS, Reach, FDA, TUV a me SGS |
| Kūlike me | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, Paʻi XYZ, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker a me nā mea paʻi FDM 3D ʻē aʻe. |
| Pūʻolo | 1kg / pahu;8 spools / ctn a i ʻole 10spools / ctn ʻeke plastik i hoʻopaʻa ʻia me nā desiccants |
Nā kala hou aku
Hōʻike kiʻi kiʻi
Pūʻolo
| ʻO ka mānoanoa | 1.3 g/cm3 |
| ʻIkepili Kahe Kahe (g/10min) | 5.5（190℃/2.16kg） |
| Wela Hoʻokaʻawale Temp | 85℃, 0.45MPa |
| Ikaika U'i | 52.5 MPa |
| Elongation ma ka Haka | 5% |
| Ikaika Flexural | 45MPa |
| Modulus Flexural | 1250MPa |
| IZOD Ka ikaika o ka hopena | 8kJ/㎡ |
| Ka lōʻihi | 6/10 |
| Hiki ke paʻi | 9/10 |
Hale Hana Hana
ʻO Torwell, kahi mea hana maikaʻi loa me nā ʻike ma mua o 10 mau makahiki ma ka filament paʻi 3D.
No ke aha ʻo PETG Carbon Filament filament?
ʻO ka filament paʻi Carbon Fiber PETG 3D he ikaika kiʻekiʻe loa i ka ratio paona, kiʻekiʻe stiffness a me ka rigidity, kū'ē i ka abrasion a me ka ʻaʻahu a me ka waimaka, ka pale kemika maikaʻi e hoʻoheheʻe i nā wai wai o nā waikawa mineral, nā kumu, nā paʻakai, a me nā kopa, a me aliphatic. hydrocarbons, nā waiʻona, a me ka nui o nā aila.
He aha ia?
ʻO nā fiber 5-10 micrometers ākea i hana ʻia me ke kalapona.Hoʻopili ʻia nā fiber ma hope o ke axis o ka mea.ʻO kēia, me kā lākou hana kino kino, ʻo ia ka mea e hāʻawi ai i kēia mea i kāna mau waiwai maikaʻi.
He aha ia hana?
Hōʻike ka Carbon Fibers i nā waiwai waiwai makemake nui:
• ʻoʻoleʻa kiʻekiʻe
• ka ikaika tensile kiʻekiʻe
• ka hoʻomanawanui wela kiʻekiʻe
• kiʻekiʻe kemika kū'ē
• kaumaha haʻahaʻa
hoʻonui wela haʻahaʻa
Pehea e hana ai?
ʻO ka hoʻoikaika ʻana i ka plastic me nā fiber carbon e hana i kahi filament paʻi 3D e hōʻike ana i nā waiwai maikaʻi loa o nā fila kalapona a me ka plastic i koho ʻia.
He aha ka maikaʻi no?
Kūpono no kēlā me kēia noi e koi ana i ke kaumaha māmā a me ka rigidity.No kēia mau kumu, kaulana loa ka filament carbon fiber i ka aerospace, civil engineering, military, and motorsports.
Mea Abrasive
He mea abrasive kēia mea ma waena o nā filament paʻi 3D.Hiki i nā mea hoʻohana ke ʻike i nā nozzle keleawe maʻamau e nau koke ʻia i ka hoʻohālikelike ʻia me ka lole maʻamau a me ka waimaka.Ke hoʻopau ʻia, e hoʻonui like ʻole ke anawaena nozzle a ʻike ka mea paʻi i nā pilikia extrusion.
Ma muli o kēia, makemake nui ʻia e paʻi ʻia kēia mea ma o ka nozzle kila paʻakikī ma mua o ka metala palupalu.Hiki ke ma'alahi a ho'okomo ma'alahi nā nozzles kila pa'a ma muli o nā kuhikuhi a kāu mea hana pa'i.
| Ka Mahana Extruder(℃) | 230 – 260℃Manaʻo ʻia 245℃ |
| Mehana moe(℃) | 70 – 90°C |
| Nozzle Size | ≥0.5mmʻOi aku ka maikaʻi o ka hoʻohana ʻana i nā Nozzle Steel Hardened. |
| Ka Mamakini Pehi | Ma 100% |
| Ka māmā paʻi | 40 –80mm/s |
| Moena Pumehana | Koho |
| Manaʻo ʻia nā ʻaoʻao kūkulu | Ke aniani me ke kāpili, Pepa masking, Blue Tape, BuilTak, PEI |
