Torwell PLA Carbon Fiber 3D Printer Filament, 1.75mm 0.8kg/spool, ʻeleʻele ʻeleʻele
Nā hiʻohiʻona huahana
ʻO nā filament fiber carbon he mau mea i hoʻokumu ʻia e ka hoʻokomo ʻana i nā ʻāpana o ka fiber carbon i loko o kahi kumu polymer, e like me nā filament metala akā me nā fila liʻiliʻi.Hiki i ke kumu polymer o nā mea paʻi 3D like ʻole, e like me PLA, ABS, PETG a i ʻole nylon, a me nā mea ʻē aʻe.
Hoʻonui i ka ikaika a me ka ʻoʻoleʻa, ʻO ke kūpaʻa o ke ʻano maikaʻi, ka pau ʻana o ka ʻili maikaʻi.ʻO ke kaumaha māmā e hoʻolilo i kēia filament 3d i koho maikaʻi no nā mea hana drone a me nā mea leʻaleʻa RC.
| Brand | Torwell |
| Mea waiwai | 20% High-Modulus Carbon Fibers i hui pū ʻia me80%PLA (NatureWorks 4032D) |
| Anawaena | 1.75mm/2.85mm/3.0mm |
| ʻupena paona | 800g/spool;250g/spool;500g/spool;1kg / pahu; |
| Kaumaha nui | 1.0Kg/spool |
| Hoʻomanawanui | ± 0.03mm |
| Length | 1.75mm(800g) =260m |
| Kaiapuni Waiho | Maloo a me ka makani |
| Hoʻonohonoho hoʻomaloʻo | 55˚C no 6h |
| Nā mea kākoʻo | E noi meTorwell HIPS, Torwell PVA |
| Apono Hooiaio | CE, MSDS, Reach, FDA, TUV a me SGS |
| Kūlike me | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, Paʻi XYZ, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker a me nā mea paʻi FDM 3D ʻē aʻe. |
| Pūʻolo | 1kg / pahu;8 spools / ctn a i ʻole 10spools / ctnʻeke plastik i hoʻopaʻa ʻia me nā desiccants |
Nā kala hou aku
Pūʻolo
Hale Hana Hana
ʻO Torwell, kahi mea hana maikaʻi loa me nā ʻike ma mua o 10 mau makahiki ma ka filament paʻi 3D.
No ke aha PLA Carbon Filament filament?
ʻO Torwell PLA-CF he kalapona PLA 1.75mm me ka ikaika kiʻekiʻe a me ka rigidity kiʻekiʻe i ka wā e hōʻike ana i ka paʻakikī maikaʻi.Hōʻike pū ʻia ka filament paʻi 3D carbon fiber 3D i kahi satin a me ka hoʻopau matte maikaʻi e hoʻomaʻamaʻa maikaʻi i ka paʻi.
Hoʻohui ʻia ʻo Carbon Fiber (loaʻa ka 20% carbon fiber, i ke kaumaha) me ka PLA e hana i kahi plastic ikaika i kūpono no ka paʻi ʻana i nā mea e koi ana i ka ikaika hou, ʻoi aku ka abrasive ma mua o ka PLA maʻamau.
Mea nui
A. ʻOi aku ka palupalu o ka Carbon Fiber ma mua o ka PLA maʻamau i kona ʻano filament, no laila pls mai kūlou a mālama pono iā ia e pale i ka haki.
B. Paipai mākou e hoʻohana i ka nozzle 0.5mm a i ʻole ka mea nui aʻe e pale aku i ka paʻa ʻana.
C. E ʻoluʻolu e hoʻokomo i ka nozzle abrasive resistant ma kāu mīkini paʻi ma mua o ka paʻi ʻana me Torwell PLA-CF e like me ka nozzle stainless-steel.No ka mea ʻoi aku ka maʻalahi o ka filament carbon fiber PLA i ka makū, e ʻoluʻolu e ʻoluʻolu ʻaʻole e hoʻohana iā ia i loko o kahi ʻano wai kiʻekiʻe a hoʻihoʻi iā ia i ka mea ʻino hou ma hope o ka hoʻohana ʻana.
FAQ
A: Hana ʻia ʻo Torwell carbon fiber i ka ʻoki kalapona.
A: 1-3mm
A: ʻO nā pulu kalapona Torwell he modulus waena.
A: Loaʻa iā Torwell pla filament ma kahi o 20% carbon fiber content.
| ʻO ka mānoanoa | 1.32 g/cm3 |
| ʻIkepili Kahe Kahe (g/10min) | 5.5（190℃/2.16kg） |
| Wela Hoʻokaʻawale Temp | 58℃, 0.45MPa |
| Ikaika U'i | 70 MPa |
| Elongation ma ka Haka | 32% |
| Ikaika Flexural | 45MPa |
| Modulus Flexural | 2250MPa |
| IZOD Ka ikaika o ka hopena | 30kJ/㎡ |
| Ka lōʻihi | 6/10 |
| Hiki ke paʻi | 9/10 |
| Ka Mahana Extruder(℃) | 190 – 230℃Manaʻo ʻia 215℃ |
| Mehana moe(℃) | 25 – 60°C |
| Nozzle Size | ≥0.5mmʻOi aku ka maikaʻi o ka hoʻohana ʻana i nā Nozzle Steel Hardened. |
| Ka Mamakini Pehi | Ma 100% |
| Ka māmā paʻi | 40 –80mm/s |
| Moena Pumehana | Koho |
| Manaʻo ʻia nā ʻaoʻao kūkulu | Ke aniani me ke kāpili, Pepa masking, Blue Tape, BuilTak, PEI |
